Expert Answers about Prime Time Avenger ATI Travel Trailer

• Replacement Manual Override Cover for Ram Electric 3500-lbs A-Frame Jack
• If you've got an Electric Jack w/ Footplate - A-Frame - 25-1/8" Lift - 3.5K - Black # EJ-3520-BBX, which is the same as the Ram 3500-lbs A-frame jack, then the correct part you're looking for is the Replacement Manual Override Cap for etrailer A-Frame Electric Jack - Black # EJ-3520-BCP. The Replacement Manual Override Cover for Bulldog Powered-Drive Trailer Jacks - Qty 1 # BD500201 you were looking at will only fit on select Bulldog electric trailer jacks.
  view full answer...


• Could Dexter Trailer Hub part # 8-219-13UC3 Be Used on an EZ Lube Spindle
• Yes, you can swap out the grease cap of the Dexter Hub part # 8-219-13UC3 to one that has a hole and rubber plug and it would be perfectly compatible with EZ Lube spindles. For that all you'd need is the part # RG04-120 and you'd be set. The only difference between the Dexter EZ lube hubs and non EZ lube hubs is the cap.
  view full answer...


• Camera Recommendation for 2019 Prime Time Avenger ATI with Camera Prep
• Nearly all travel trailers are now prepped for the Furrion systems like the Furrion RV Observation Camera System # FOS43TASF that you referenced. When Furrion was here not long ago they bragged that all RVs that are prepped for a camera are prepped for a Furrion system. The # FOS43TASF is what you would need. Or for a larger 5 inch screen part # FOS05TASF that not only has a larger screen, but also will allow you to add up to 3 additional cameras to give you a total of four.
  view full answer...


• Will The Alpha Systems Patch Kit Work On All TPO RV Roofs
• The Alpha Systems Patch Kit for SuperFlex RV Roof Membranes # AL37CV is designed for TPO membranes so branding would not matter and you'd be good to go regardless of which brand your roof is.
  view full answer...


• Will HWT Trailer Wheels Fit Despite Having Different Bore Size
• The HWT Aluminum Hi-Spec Series 6 Trailer Wheel # AM22652B is a lug-centric wheel, meaning it will secure to your hub by sliding onto the lugs so the fact it has a different bore diameter than your current rim is perfectly fine. These 15" x 6" rims have a 6 on 5-1/2" bolt pattern, which is the same pattern your hub would need to have in order for this wheel to fit correctly; if you are unsure of your bolt pattern you can take a look at the help article I linked which explains how to determine...
  view full answer...